Painting Plastic Window Sashes

Paint the sash and allow the paint to dry.

Painting plastic window sashes.

With the old paint removed and the wood cleaned up and repainted prep the sash before the old glass can be put back in. Peel the masking liquid off the glass. Proper painting will protect the putty and keep the window functio. The sash is secondary.

All the sashes on the windows were already black and because i liked the palette when we changed the body and trim colors we kept the black window trim. Finish painting the outer sash start by painting the glazing bars 6 and 7. The sashes may be painted shut the top sash in particular. By leaving these areas bare you allow both rails horizontal parts of the sash frame and both stiles vertical parts of the sash frame to expel moisture.

Painting the sash and the window jamb or sill the same color will make the sash look too large and throw off the proportions of the window. The paint can be applied right to the cured masking liquid. Use a window scraper fitted with a sharp single edge razor blade to scrape any excess paint off the glass. Step 4 paint the window casing and.

Hi kristie great topic. Apply a bead of the glazing to the inside of the frame image 1 on all four sides. Then the upper cross bar 8 and finish with the two side rails 9 and 10 brushing the paint to blend it with the previous painted areas. You may need to run the corner edge of our stiff putty knife down the sides and across the top of the sashes to break the old paint loose.

Position a 6 wide putty knife against the sash and glass. A long time before discovering the new sherwin williams product for this purpose we had to paint our 1881 house in ma. The window sash step 1 raise the lower sash and drop the upper sash. After two top coats have been applied and dried use a razor knife to cut a clean line between the window glass and the wood.

Use a paint brush to apply a top coat to the wood parts of the window sash. A back bedding of window glazing that will sit on the inside of the window gives an extra seal for the glass. Slide the inner sash down and slide the outer sash up use the unpainted cross member to pull the outer sash up to expose the top half of the outer sash above the inner sash. Step 3 continue to the lower sash beginning with the crossbar.

Don t forget that the exterior paint could also cause the sashes to stick. Furthermore the casing supports an opening in the wall and the paint job should show that structure.